Woodworking is all about wonders and creations. Turning a piece of understated furniture into a masterpiece really needs some serious passion that can make people have a double sight of that particular thing.
Woods are probably the most popular material that these passionate folks work with.
When you’re a newbie at working with wood for your DIY projects, you may have developed the habit of driving a nail straight down your workpiece.
By and large, that’s a good habit. But in some cases, you need to drive a nail at an angle into a piece of wood.
This is called toenailing. It’s actually skilled that every carpenter develops because you’re eventually going to need it.
There is nothing more frustrating than leaky roofing especially when you are a homeowner.
Once you realize your roof is leaking, so many different questions come in mind.
Over the years, framing has been an essential element of the construction of any building.
Framing involves handling large wood projects, including building decks, constructing a room, or framing exterior walls.
The process uses a specialized nail gun, a framing nailer, to fasten 2x4s for the walls and 2x8s or 2x6s for building roofs and floors.
Squeaky floors happen even though you might not want them to.
Though it’s not that common like leaky roofing for the house owners and you have to prepare for that it may happen if you use wooden flooring.
They happen because the wood flooring comes up from the subfloor due to the house settling, materials drying out, changes in the weather, boards rub together, or general movement in the flooring.
When it comes to framing nailers, you have different types of framing nailers to choose from.
These tools can be different from each other in various ways, such as in the power source they use, or whether they use a round or straight magazine.
The angles of these nailers can be different as well.
Let’s first get something clear. The degree and angle of the framing nailer don’t refer to how the nail is driven slanted into the surface. There’s no slant here—the nail goes in straight as it should.
Instead, the angle mentioned here refers to the angle of the nail magazine in relation to the head. This determines the kind of collation the nail must use for it to work with the framing nailer.
This angle can include the ones with 15 degrees of angle. What sets these nailers apart is that they all use wire-coil collation. In other words, you have 2 thin wire strips holding the nails together at a 17-degree angle. The collation is circular and the nails tend to have a full round head.
This is good news for many since a full round head is often the preferred type for building code. The collation also isn’t affected by moisture, unlike paper collation.
With this, you won’t have trouble accessing tight corners that you often encounter in framing applications. You can do wall studs and floor joists without too much difficulty.
Many framing nailers of this type can hold plenty of nails, so you won’t have to interrupt the work for reloading. You can easily find nailers that can hold 200 to 300 nails.
These fasteners can add to the weight, though, so jobs can become a bit more strenuous. Also, in general you can only buy the nails you need in sets of 3,000 nails.
These can go from 20 to 22 degrees. This also uses a round head nail, except this time you have a plastic strip for collation. The great angle lets you work more easily in tight corners.
On the other hand, you’re generally limited to about 60 to 70 nails. The plastic strip also breaks apart when you fire the nails, so you’ll need eyewear for protection. Afterwards, you’ll have to deal with the plastic debris scattered in the work area.
This has wire strip collation, and you can use both clipped-head or the round offset head nails. This is actually quite compact as the nails are held very closely together. You can also get up to 100 nails per load.
The main problem here is that offset head and clipped head nails may not be permitted by the building code. So, check first.
Both these angles are generally grouped together because they’re very similar to each other. The great angle allows for better access to tight angles. Full-round offset or clipped-head nails are used, so again you have to check the building code.
This uses paper strip collation, which leaves less of a mess than plastic and most magazines hold 2 strips of nails. On the other hand, with moisture in the picture you can have failure issues.
This actually depends a lot on personal experience and preference. Some people have used 30-degree framing nailers all their lives. However, in other places you can find woodworkers who have only used 21-degree framing nailers, and they haven’t even seen a 30-degree framing nailer.
But now that you have learned about them all, you can try them all out for yourself. Now we may be more comfortable with the 30-degree version, but then that may just be us.
Still, we like how easy it is to use one of these things. They’re compact and lightweight, and that sure is better to use a bulky and heavy framing nailer.
That’s our preference. That may not be yours. Debating the matter will be futile—it’s like debating the best color. Each one of us has our favorite. If you’re working with a team, you may find that everyone there may be using a particular angle for their framing nailers.
If that’s the case, you may want to just go with the flow so the work goes more smoothly. Remember what they say: the nail that sticks out gets hammered!
At least now you know that some angles for framing nailers can be better for some tasks than for others. Just remember that the angle mentioned here has nothing to do with the size of the nail you can use. You can use nails from 2¾ to 3¼, regardless of the degree for the framing nailer. Just make sure that the nailer uses nails that are permitted by the building code.
The stats on nail gun use among carpenters aren’t exactly encouraging. Up to 40% are injured within their first 4 years of training. Twenty percent are injured twice within that period, and even 10% get hurt 3 times or more.
Here are some tips that can help nail gun users from becoming part of these unfortunate stats:
Woodworking or wood-based projects have been the move of the current times and trending on the social web. And why it wouldn’t after all since the present times are dependent on standards of technology and its smart maneuvers, that not only serve the industrial grounds but also to earn.
A daily dose of the meal. Taking this into consideration here we cite an option as “What are some good woodworking projects for beginners?” as a guide to the interesting ones to opt for.
An air compressor is one of the primary tools needed for doing power nailing or bodywork on vehicles.
Most of us enjoy puttering around our garage doing small repairs.
One of the facts of modern life is that you can’t really stop modern technology from evolving.
Clever take ancient tools and then turn them into more efficient electrically-powered machines that can help you do any task faster, with less effort and with fewer mistakes.
Yet in woodworking, the hand tools vs power tools debate rages on.