Archive

Category Archives for "Guides"

Hardie Board vs Vinyl Siding: Which One to Choose?

Hardie Board vs Vinyl Siding

Protecting your building exterior from some common threats like pests, heat, temperature, debris, or any other harsh environmental condition is even more important rather than building it. Using exterior siding can help you achieve what you want in this context. Two very popular siding materials being used frequently are HardiePlank Fiber Cement Board and Vinyl Siding. Again, a very common dilemma running in many minds while doing their siding project is which material to pick among these two. Here in this article, hopefully, your confusion will come to an end. 

Hardie Board vs Vinyl Siding

Comparing Hardie vs. Vinyl Siding

Let’s evaluate the different factors one by one of the two siding materials. Then, you’ll get a complete picture of their ultimate comparative analysis.

Material Thickness

Hardie board is more like real wood. It’s around 0.2 inch-thick, whereas vinyl siding is only 0.040 inches in dimension. So, Hardie is clearly 2½ to 3 times thicker. Heavy-gauge vinyl siding can be 0.05-inches thick. Again, you can provide foam sheathing or insulation to add even greater thickness to the back. But still, the Hardie board ensures better curb appeal.

Read: Best Nail Guns For Hardie Siding

Durability 

Both the Hardie Board and Vinyl Siding give extended durability. They don’t need regular painting like wood lap siding or regular maintenance like cedar shake. Moreover, both of the sidings can resist harmful pests or rot. Vinyl siding gives 25 years long warranty facility. But it gets brittle with time and due to excess exposure to heat or cold for ages. The siding then also gets fragile. In comparison, Hardie Board is a real winner, durable enough to serve 30 to 50 years.

Texture

Hardie Board requires some extra embossing due to its extra thickness, which gives a real wood-like exterior texture. On the other hand, Vinyl siding has less thickness and thus misses deep texture than Hardie. 

Fire Resistance

Unlike any wood siding, Vinyl siding can slow down the fire flames. It’s not entirely fireproofed, though. At around a 700-degree fire, it gets ignited. But beforehand, at 165-degree, it starts getting melted. Hardie Boards are made of sand and cement, which are impressively fire-resistant. They don’t feed flames.

Energy Efficiency Comparison

Vinyl Siding doesn’t offer much insulation, but you can purchase the siding with some built-in insulation. This factor helps your siding achieve more energy efficiency. Thus, your room remains cooler on warm days and hotter in chilly conditions. But usually, Hardie Board doesn’t offer any such convenience. One point for Vinyl Siding!

Maintenance

While working with real wood siding or shingles, you’ve to give more of your time, money, and effort for their upkeep. They need regular treatment and painting. Unlike real wood, both vinyl siding and Hardie board are almost maintenance-free. Vinyl siding never needs repainting, whereas the Hardie board might require a change after 5 years or a decade. Cleaning vinyl siding is no task. You’d only need a garden hose to clean it off, just like Hardie Board. To get rid of any disgusting pest over their surface, you may use a non-abrasive brush. 

Repairing

If a vinyl siding gets damaged or faded in color, you can use an unlocking tool to remove the damaged panel from the existing ones. Be careful with the nail strip while removing the panels. Hardie Boards need a lot to take to damage them. Again, when they get cracked, they’re also tough to repair. Use a pry bar to remove the broken or damaged plank. You need to be extra cautious, so it doesn’t cause any further damage to other planks. 

Installation Process

Hardie Boards are bulkier and heavier in weight than vinyl sidings. Thus, installing Hardie Cement Board requires some special skills and also much labor time. Vinyl planks are lightweight and less dense. That’s why they are easier to install. 

Read: Best Way to Cut Hardie Siding: Step by Step Guide

Eco-friendliness 

Vinyl siding is made of plastic and polymer materials. They don’t get decomposed easily and require landfills of several decades. Thus, Vinyl has an adverse impact on the living environment. On the contrary, Hardie Boards are actually a mixture of sand and cement. They are totally eco-friendly.

Versatility 

When it comes to the versatility of both siding materials, vinyl siding is a hands-down winner. It comes with 360 different colors! You can increase your home curb appeal in a greater way using vinyl siding than Hardie Boards.

Cost Comparison

Considering every aspect like the product itself, installation cost, labor expense, repairing, Hardie Board is far more expensive than vinyl siding. For your easy assumption, the maximum expense of vinyl siding is the minimum that of HardiePlank Board. All the advantages of Hardie Boards come with a greater price, aren’t they?

Final Thoughts

Both siding materials have their own pros and cons. If you put your priority on versatility or energy efficiency within your tight budget, then Vinyl Siding is your thing. But, if you focus on durability, service for ages, resistance from almost everything, and most importantly, if you look for an environment-friendly option, just go for Hardie Boards.

Best Way to Cut Hardie Siding: Step by Step Guide

Best Way To Cut Hardie Siding

One of the most important and vulnerable parts of a house is the roof. Builders always have to keep in their minds that they have to choose sidings that are durable and prevent the house from rain, harsh weather, and fire. 

Hardie sidings are well known for their durable and strong sidings. James Hardie is known for creating Hardie boards and sidings. They are also known as cement boards. Hardie sidings have been popular among builders because of their durability. Before installing sidings on the roof, you have to cut it in a proper size so that it can fit in.

Let’s brush your eyes on the tools and steps that you have to follow to cut a Hardie siding. 

Best Way To Cut Hardie Siding

Assemble your materials

To install Hardie sidings, always make sure that you have proper tools and protection. Take a proper place where you can put your sidings and cut them according to your desired sizes. Let’s have a look at the tools you need to cut Hardie Siding. 

Read Here: 11 Best Nail Guns For Hardie Siding and Trim

Tools you need

  1. Layout Square: To measure the size of your siding correctly. 
  2. Any power tool: Usually, a circular saw is useful for cutting the sidings. You can choose a wet saw, jigsaw, or a compound miter saw to cut your siding properly. 
  3. Hardie saw blade: This blade is specially built for cutting Hardie sidings. 
  4. The Gloves: To protect your hand, you must wear gloves. 
  5. Eye goggles: If you are not using a saw which has a dust collector, you must wear eye goggles to protect your eyes from the dust. 
  6. A Marker: You must need a marker to mark the layout.
  7. Snapping or Scoring tool:  It will help you to cut a groove in a sheet of material.
  8. Measurement tape: Finally, a tape to measure the size.

You have all the tools in your hand, and now it is time to cut the sidings. Go through the following steps provided to cut Hardie siding properly.

Step by Step Instructions for Best Way to Cut Hardie Siding

Step-01 Power tool and Blade

First of all, install the Hardie Blade saw in the power tool that you are using. This blade is mainly built to cut Hardie sidings and boards. You can use a normal diamond saw blade to cut the siding. However, it will produce too much dust. Read the manufacturer’s manual before installing the blade. 

If you are using a circular saw, you should use a blade that has four or six teeth. 

Step-02 Measure and mark the siding

Measure the area with measuring tape where you will go to install the siding. After that, take a layout square to measure how much siding you need to cut. Use a marker to mark the area. 

Always double-check your measurement before using the saw on the siding. 

Step-03 Use the Snapping or Scoring tool 

To make a perfect cut, you can use snapping or scoring tools before using the saw. Snapping or scoring tools will give you temporary marks on your sidings. By the marks, you can use your saw without any hesitation. 

For using snapping or scoring tools, you have to take your siding on a flat surface. Draw the lines with a marker and then strike four to five times on the marked area with your scoring or snapping tool. 

Please wear gloves and goggles to protect your eyes and fingers. 

Step-04 Use the Power tool

Place your siding under the saw and make a proper angle, which will help you cut the sidings properly. 

You should use a circular saw if you want to cut straight lines. This kind of saw is handy because you can easily move it. Always use a blade with four or six teeth. Some workers love to use wet saws, which decrease the dust and save time. And if you are a beginner, use a jigsaw. As it is manual, it can be handled easily. 

Make sure that you have adequate protection while cutting the sidings. Do not forget to wear a mask. Try to use those types of masks which can protect you from the dust. Gloves should be used while using the blade to prevent any accidents. 

Tips

  1. Always use a flat surface while cutting the sidings. 
  2. After finishing your work, store your tools and blades safely. 
  3. Read the manufacturer’s manual before using the saw.

Also Read:

How to Install Hardie Board on Floor

How to Install Hardie Siding Around Window

Hardie Board vs Vinyl Siding: Which One to Choose?

Conclusion

Cutting a Hardie siding is not difficult if you properly follow the steps which have been discussed here. Always use the correct and proper tools and blade to cut the Hardie Siding. And do not forget to take protection before starting your work.

Best Staple Gun for Picture Framing: 9 Top Choices Review

Best Staple Gun For Picture Framing

Staple guns have many applications in different DIY projects. But among all of them, picture framing is the most common one. People widely use this gun for framing related tasks. It’s possible to follow other framing methods while completing picture framing, but not any of them is as efficient as a staple gun can perform. 

Now you need to find the right staple gun that can serve you over the years without causing any trouble. With the Best Staple Gun for Picture Framing, wooden picture framing will be just a snap. There are so many different options in the market.

Continue reading